HENGYANG ZK INDUSTRIAL CO., LTD
HENGYANG ZK INDUSTRIAL CO., LTD PROFESSIONAL IN COLD SHRINK TUBING
Add to Cart
Product name:
EPDM Cold Shrink Tube For Tool Grip /Cold Shrink Handle Tube For Watertight Termination
Description:
Zk EPDM cold shrink tube is an open-ended cold shrink rubber sleeve, which is pre-expanded by the factory and assembled onto a removable core. The core is removed when the tube is positioned for installation over an online connection or termination lug. It provides a tight water proofing property for termination and joints.
We have more than ten years experience of cold shrink tube line with professional technical knowleage and good performance.
Product Features:
1:Excellent weather resistance, ultraviolet aging resistance.
2:higher embrittlement resistance than heat shrink tubing
3:More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
Why spend too much money on 3M cold shrink tube?
Our EPDM cold shrink tube is manufactured with high performance EPDM and higher shrink ratios, resulting in a more watertight seal, with equal pressure radially applied around your connector and cable body. When removing silicone cold shrink tube, you're left with a mess like you would be with traditional rolls of butyl or self amalgamating tape. Silicone cold shrink tube really is the future of weatherproofing!
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg. bicycle handle etc. With it’s good performance: water-proof, Acid and alkali resistance, seal, protection sleeve and low voltage seal insulation under 1kv.
| Material technical parameters: | |||||
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 | |